- Sundi Tools
- Punch Tooling
- Ejector Punch Pins
Ejector Punch Pins
Ejector punch pins refers to the metal parts on the stamping die of mechanical tools, also known as punching rod, punching needle or punch pins, it is installed on the stamping tooling for continuous punching operation, marking the processed material separated or plastic deformation, so as to get the required finished or semi-finished products.
We specialized in the design and manufacturer of carbide or steel ejector pins for different requirements, our professional engineers designers can work with you ,using your requirements and preferences to provide you with quality replacement parts to the most demanding specifications.
- Quality Assurance
- OEM/ODM Service
- Cost Saving
- Fast Delivery
Show Case
Ejector Pins
Supported with heat treatment and ultra-cryogenic processing technology,the pins material performance is greatly increased 30% in hardness and wear resistance .
HSS Punches Pins
We have strong ability to produce all kinds of HSS ejector punches for metal stamping tools or other molds.its tolerance can reach +/-0.001mm.
Ejector Pins with Coatin
All ejector punch pins are manufactured with the highest level of carbide,DLC or TiN coating are available.
The Specification of Ejector Punch Pins
Specifications | Details |
---|---|
Surface, Cylindrical Grinding | Manual, CNC with +/-0.002mm |
CNC turning | CNC with +/-0.005mm |
Profile Grinding | CNC with +/-0.002mm |
Wire EDM | CNC with +/-0.002mm |
Surface Treatment | Polishing,DLC, TiN,TiCN and more |
Secondary Service Offered | Design, machine and assembly |
Typical Lead Time | AS short as two days for urgent |
Material | Material Introduction | Hardness |
---|---|---|
Carbide | High precision,high hardness and good strength. | HRC88-90 |
SKH-9/SKH-51 | High wear resistance,high compressive strength,very good hardenability of dimensional stability. | HRC61-62 |
SKD11 | It is a cold die steel with superior abrasion. The effect of heat treatment is stable. Steel for cold forging dies of deep drawing dies. It has good hardenability and good wear resistance. | HRC56-58 |
#45 steel | It is a kind of high quality carbon structural steel, after quenching the hardness of workpiece hard is too low after quenching, so it is suitable for the surface hardening parts with no requirement of core strength. | HRC40-45 |
ASP23,ASP30,ASP60 | It has high wear resistance (abrasive wear resistance), high compressive strength, excellent hardenability, good toughness, good dimensional stability of heat treatment, good temper softening resistance. | HRC62-64 |
You may also like
- Carbide Punches
- Carbide Dies
- Tool Steel Punches
- Special Punches and Dies
- Alumina Ceramic (Al2O3 )Parts
- Zirconia Ceramics (ZrO2 )Parts
- Silicon Nitride Ceramics
- Special Ceraimic Parts
- CNC Turning
- CNC Milling
- CNC Drilling
- Speical CNC Parts
- Punch Pins
- Mold Plate
- Speical Components
- Cut Tools